The DVA Pieps DSP Pro is the ideal ally for mountaineers who demand high performance from their DVA equipment which must support them in all situations.

Test conditions

Switches to transmit mode and then to search mode with search of a DVA more than 30 meters away. Testing the victim marking function.

Pieps DSP Pro DVAtransmission mode.

Switching to transmit mode while the DVA is in "off" mode is done by pressing the padlock (black on yellow background) and sliding the lever to "send". The display shows AR of the directional arrows and the battery capacity. You are now in transmit mode and the button cannot be moved (it is blocked by the lock).

You can put it on you. We advise to put it just above the 1st layer so that it is protected in case of avalanche and that it stays on your body and does not risk to leave.

Mode off

Emission mode

- The search mode

When the DVA Pieps DSP Pro is in "transmit" mode to switch to search mode, you still have to slide upwards to "search" while pressing the padlock (black on yellow background). The unit will immediately start searching and if a DVA is nearby they will give you the distance and direction.

In case of an avalanche, to return the DVA Pieps DSP Pro to transmit mode, simply press the button down and return directly to transmit mode.

The search is very wide, the maximum range is 60 meters.

- Victim identification

The DVA Pieps DSP Pro is equipped with the multi victim search, the strongest signal appears, so that this signal does not appear any more just press the flag button to search for more victims.

Also, the DVA Pieps DSP Pro is equipped with the multi-victim search:

Inclinometer function, just put it on the stick and press the button with the waves above the victim identification.

Works with 3 alkaline batteries

Group check