Tecton 12: Power - Safety - Comfort
Alpine skiing with Power Rail
Lateral release l at the front with dynamic stroke of 13 mm
Front trigger at the rear with dynamic stroke of 9 mm
Easy to wear (NEW)
Comfortable handling of all functions
DIN: 5 - 12
Width of the ski: > 67 mm
Weight: 550 g / unit without ski stop
Options stop ski: 90/100/110/120 mm (80 g / unit)
Transfer of forces in three dimensions
Easy and precise handling of skis, even wide. At the rear, where major forces occur, Tecton 12 remains as stable and rigid as an alpine ski binding and transfers forces directly and without loss between the boot and the ski.
Direct contact shoe-binding-ski. The restraint system provided by the jaw plate the sole of the boot on the base plate in direct connection with the ski, ensuring a permanent transfer of forces.
As in a vice
The shoe remains motionless. Absolute novelty: Power Rail housed in the jaw of the heel works on the insert, immobilizes the shoe in the center and prevents loss of forces due to lateral movements.
The heel piece remains stable. The heel keeps its lateral stability downhill. Unlike other pine fasteners, the transfer of forces is not interrupted by the rotary movements of the heel piece.
Compensation of traction forces. As with the alpine ski bindings, the front trigger occurs at the DIN value set via the jaw of the heel piece with a dynamic stroke of 9 mm. The return force of the spring prevents unwanted triggering and compensates for the high pulling forces applied to the leg in the event of a forward fall.